Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® Advanced N2U40G7 UN - PA9T FR - BASF

Material Data Center offers the following functions for Ultramid® Advanced N2U40G7 UN:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultramid A datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 模塑测量的特殊性能
Any use of this information falls under the rules of our disclaimer.
材料文字说明
该产品是一种无卤阻燃高温聚酰胺，具有高流动性、耐高温表面贴装技术（SMT）、优异的机械性能和高尺寸稳定性，这些都使其非常适合电子电气应用，尤其是各种薄壁连接器和插座。
加工/物理特性干 / 已调节单位Test Standard
ISO数据
熔体体积流动速度, MVR 20 / * cm³/10min ISO 1133
温度 325 / * °C -
载荷 2.16 / * kg -
模塑收缩率, 平行 0.2 / * % ISO 294-4, 2577
模塑收缩率, 垂直 0.8 / * % ISO 294-4, 2577
机械性能干 / 已调节单位Test Standard
ISO数据
拉伸模量 12500 / - MPa ISO 527
断裂应力 150 / - MPa ISO 527
断裂伸长率 2 / - % ISO 527
弯曲模量, 23°C 12800 / - MPa ISO 178
弯曲强度 230 / - MPa ISO 178
无缺口简支梁冲击强度, +23°C 60 / - kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 13 / - kJ/m² ISO 179/1eA
热性能干 / 已调节单位Test Standard
ISO数据
熔融温度, 10°C/min 305 / * °C ISO 11357-1/-3
热变形温度, 1.80 MPa 275 / * °C ISO 75-1/-2
线性热膨胀系数, 平行 14 / * E-6/K ISO 11359-1/-2
线性热膨胀系数, 垂直 62 / * E-6/K ISO 11359-1/-2
厚度为h时的燃烧性 V-0 / * class IEC 60695-11-10
测试用试样的厚度 0.2 / * mm -
灼热丝燃烧指数 (GWFI) 960 °C IEC 60695-2-12
GWFI - 测试用试样厚度 0.75 mm -
灼热丝引燃温度 (GWIT) 800 °C IEC 60695-2-13
GWIT - 测试用试样厚度 0.75 mm -
电性能干 / 已调节单位Test Standard
ISO数据
体积电阻率 >1E13 / - Ohm*m IEC 62631-3-1
表面电阻率 * / >1E15 Ohm IEC 62631-3-2
其它性能干 / 已调节单位Test Standard
密度 1490 / - kg/m³ ISO 1183
Bulk density 700 kg/m³ -
模塑测量的特殊性能干 / 已调节单位Test Standard
ISO数据
粘数 77 / * cm³/g ISO 307, 1157, 1628
典型数据
加工方法
注塑, 其它挤出成型
供货形式
粒料, 自然色
特殊性能
阻燃的, 无卤, 经热稳处理的/耐热的
特征
颜色稳定性
应用
IT/商务机器, 电子电气
地区供应
亚太
其他信息
注塑成型
PROCESSING
injection molding, Melt temperature, range: 300 - 330 °C
injection molding, Mold temperature, range: 100 - 140 °C
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.